Mines Strategy: How to Read the Numbers and Clear the Board
Mines is a game of pure deduction with a little luck at the edges. The board hides a fixed number of mines, and every square you open tells you how many of its eight neighbours are mines. Most players learn the basic rule in a minute and then plateau, because they never learn the handful of patterns that do most of the work. This guide covers those patterns, in the order you will meet them.
The boards
- Easy: 9×9 squares with 10 mines (about 1 square in 8).
- Medium: 12×12 squares with 24 mines (about 1 in 6).
- Hard: 16×16 squares with 40 mines (about 1 in 6, on a much bigger board).
The mines are only placed after your first click, and never on or next to the square you clicked. So your first click always opens an empty area, and you never lose on the first move. A good first click is near the middle of the board, where the opened area tends to be largest.
Rule one: a number counts its eight neighbours
A "3" means that exactly three of the (up to) eight squares around it are mines. Squares on the edge have only five neighbours, and corner squares have only three. That sounds simple, and it is, but everything else follows from two consequences:
- All mines found: if a number already has that many flags around it, every other closed square around it is safe.
- All squares needed: if a number has exactly as many closed squares around it as its value, every one of them is a mine.
A "1" in a corner of an opened area that touches only one closed square is the classic example of the second rule: that square must be the mine. Flag it, and then look at the numbers around the flag, because the first rule probably opens up several squares next to it.
Chording: open several squares at once
When a number already has all of its mines flagged, click the number itself. The game opens all the other closed squares around it in one go. This is called chording, and it is the biggest speed-up in the game. It only works if your flags are right, so flag carefully: a wrong flag followed by a chord will open a mine.
On a phone, long-press a square to flag it, or switch on Flag mode so that every tap places a flag.
Pattern: 1-1 along a wall
Look along the edge of an opened area. Say two 1s sit side by side against a straight wall of closed squares, and the first 1 is at the end of the wall. The first 1 touches two closed squares, and its mine is one of them. The second 1 touches those same two squares plus a third one. Since the second 1's mine is already among the first two squares, the third square is safe. Open it.
The general idea is called subtraction: if the closed neighbours of one number are a subset of another number's closed neighbours, the difference in their values tells you how many mines are in the extra squares. If the difference is zero, they are all safe. If the difference equals the number of extra squares, they are all mines.
Pattern: 1-2-1
Three numbers 1, 2, 1 in a row along a straight wall of closed squares: the mines are always under the two 1s, and the square under the 2 is safe. You can check it with subtraction: the 2 needs two mines among its three squares, but each 1 allows only one in its pair, so the middle can't be a mine.
Pattern: 1-2-2-1
Four numbers 1, 2, 2, 1 in a row against a straight wall: the mines are under the two 2s, and the squares under the 1s are safe. Once you have seen it a few times you will recognise it instantly.
Pattern: a 2 or 3 in a corner of the opened area
When a number touches exactly as many closed squares as its value, all of them are mines. This happens a lot with 2s and 3s on corners of the opened area, and on the edges of the board, where squares have fewer neighbours. Look for these first after each big opening.
Use the mine counter at the end
The counter shows how many mines are left minus how many flags you have placed. Near the end of a game this becomes real information. If two separate closed regions are left and the counter says 1, and one region definitely contains a mine, the other region is completely safe. On Easy especially, the counter often solves the last few squares for you.
How to guess well
Sometimes the board really does run out of logic, for example when two squares are mirror images of each other and nothing distinguishes them. Then you have to guess, but you can guess well:
- Guess early rather than late. If a guess is unavoidable, it costs less time to make it before you have spent ten minutes on the rest of the board.
- Prefer squares next to low numbers. A closed square next to a 1 that has many closed neighbours is less likely to hide a mine than one next to a 3.
- Prefer guesses that give information. A square that, if safe, will reveal a number that settles the area is worth more than a square in a corner that only answers itself.
- Squares far away from everything have roughly the board's average chance of being a mine: about 1 in 8 on Easy and 1 in 6 on Medium and Hard. That is often better than a 50/50 guess next to the opened area.
Getting faster
Your best time for each board size is saved in your browser. To bring it down, stop flagging squares you don't need to flag. You only need flags where you want to chord. Learn the patterns above until you stop calculating them, and always clear the easy squares around a fresh opening before thinking hard about the difficult ones.